9
Home
Your One For All remote control can learn any function from any other working remote control. This is a
quick and easy one-time setup that allows you to control any infrared controlled device you have in your
living room. You can even combine multiple devices in one easy to use remote control – for example you
could teach the volume keys to control your Sound Bar, the TV Power and Input keys to control your TV, and
the rest of the keys to control a Set Top Box (Satellite, Cable or Freeview Receiver).
To do this, firstly make sure you have all your original remote controls to hand, and that they have working
batteries in.
To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing
towards it as shown below:
1.
Hold down 1 and 3 until the red LED blinks twice.
2.
Press and release the key you want to learn a function onto (for example the TV
Power key) – The red LED will blink continuously.
3.
Press and release* the corresponding key on the original remote, for example
Power.
4.
The red LED will blink twice to indicate the key has been learned correctly.
5.
Repeat steps 2 and 3 for each key you want to learn – remember you can learn from multiple remotes,
but only one function per key.
6.
When you have learned all the functions you require, press and hold the OK key
until the red LED blinks twice.
HOW TO SET UP YOUR REMOTE
C LEARNING
To Next Page
Loading...
Need help?
General
Weight and Dimensions
