What to do if One For All universal remote does not respond after pressing a key?
If your One For All universal remote isn't responding when you press a key, ensure you're using fresh batteries and pointing the remote directly at your television.
Why is my One for All URC-7010 not performing commands properly?
If your One For All universal remote isn't performing commands correctly, it might be due to using the wrong code. Try repeating the Direct Set-Up with another code listed under your brand. Alternatively, restart the search method to find the correct code.
How to fix problems changing channels with One for All URC-7010 Universal Remote?
If you are experiencing problems changing channels with your One For All universal remote, enter the program number exactly as you would on your original remote.
What to do if my brand is not listed in the code section for One for All URC-7010?
To address the issue of your brand not being listed in the code section for your One For All universal remote, try the search method described on page 7.
General| Brand | One for All |
|---|---|
| Model | URC-7010 |
| Category | Universal Remote |
| Language | English |
Steps for inserting batteries into the remote control.
Controls the power function of the remote.
Used for direct channel and function access.
Used for setup and accessing special functions.
Controls channel selection up and down.
Step-by-step guide to configure the remote for a TV.
To Next Page