20 WWW .ONEFORA LL.COM
Volume Punch-Through
T
his feature allows you to adjust the volume of a certain mode (e.g. TV mode)
w
hile being in a different mode (e.g. VCR). If for example you’re watching a
programme on your Video, you can adjust the volume (a TV function) without
first pressing the TV key. The chart below lists some of the possibilities:
L
ast key pressed: You can control:
SAT : TV volume up and down, mute
DVD : TV volume up and down, mute
VCR : TV volume up and down, mute
P
VR : TV volume up and down, mute
C
D : TV volume up and down, mute
AUD : TV volume up and down, mute
LIGHT : TV volume up and down, mute
E
xample: To punch through to AUD volume, being in any other mode
(e.g. VCR, SAT or DVD mode):
1
. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.
2
. Press VOLUME.
3. Then press the AUD key and the animated IR Indicator will blink twice and
the remote will return to the setup screen.
Result: VOL+/- and MUTE wil be from AUD mode independent of the selected
device mode.
To cancel the “Volume Punch Through” per mode:
Example: to cancel the “Volume Punch Through” for the VCR mode:
1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.
2. Press VOLUME.
3. Then press the VOL- ( ) key.
4. Press VCR once. The IR Indicator will blink four times and the unit will
return to the SETUP screen.
Result: being in VCR mode, you will be able to control VOL+/- and MUTE
functions of your VCR (provided it has volume control).
To cancel the “Volume Punch Through” for all modes:
1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.
2. Press VOLUME.
3. Then press the VOL+ ( ) key and the IR Indicator will blink four times
and the screen will return to the setup screen.
Result: In all modes the VOL+, VOL- and MUTE keys will now operate
the original functions again.
Extra Features
To Next Page
Loading...
