Why is my One For All Universal Remote not working?
If your One For All Universal Remote isn't operating your home entertainment component, try all the codes listed for your brand in the 'Set-Up Codes' section. If that doesn't work, try searching for your code. Also, ensure that your home entertainment component can be operated with an infrared remote control.
Why is my One For All Universal Remote not performing commands properly?
If your One For All Universal Remote is not performing commands properly, it might be due to a mistake during setup. Try all the codes listed for your brand of home entertainment component in the 'Set-Up Codes' section. Remember that while many codes may allow some operation, only one will work correctly with your equipment.
What to do if having problems changing channels with One for All A/V Producer URC 8800 Universal Remote?
If you're having problems changing channels with your One For All Universal Remote, and your original remote required pressing ENTER after entering the channel number, press the ENTER key on the a/v Producer after entering the channel number.
What to do if the red light blinks but One For All Universal Remote doesn't work?
If the red light on your One For All Universal Remote blinks when you press a key, but your home entertainment component doesn't respond, ensure you're aiming the remote at the component and are within 15 feet.
What to do if LCD screen fades on One for All A/V Producer URC 8800?
If the LCD screen on your One For All Universal Remote begins to fade, doesn't appear, or the red light blinks five times when you press a key, replace the batteries with four new AAA alkaline batteries.
Why receiver does not respond to One for All A/V Producer URC 8800?
If your receiver isn't responding to the codes listed in the manual for your One For All Universal Remote, ensure that the DSS Receiver can be operated with an infrared remote control and isn't set up to only receive Radio Frequency. The codes in the manual are designed to operate your DSS receiver on the 1st or 2nd addresses only.
Why my One for All A/V Producer URC 8800 Universal Remote audio components turn on/off but don't change channels?
Some audio components may need both a Tuner/Receiver code and an Audio Amplifier code to control all features. This might be the reason why your audio components turn on and off and control volume but do not change preset channels.
Why is my One for All A/V Producer URC 8800 not operating Bang & Olufsen equipment?
Some Bang & Olufsen products operate at a frequency higher than 100 kHz and will not work with the a/v Producer.
How to fix CH not working for RCA TV with One For All Universal Remote?
General| Device Type | Universal Remote |
|---|---|
| Brand | One for All |
| Model | URC 8800 |
| Series | A/V Producer |
| Category | Universal Remote |
| Number of Devices Controlled | 8 |
| Learning Function | Yes |
| Backlight | Yes |
| Color | Black |
| Battery Type | AAA |
| Number of Batteries | 2 |
| Compatible Devices | TV, DVD, VCR, SAT, Cable, Audio |
| Programming Method | Learning |
Step-by-step guide on inserting AAA batteries into the remote.
Description of the remote's keypad and general key functions.
Guide to setting the time and day on the remote's display.
Step-by-step guide to program the remote for home entertainment components.
Instructions for programming the remote to control a TV using codes.
Instructions for programming the remote for VCR or TV/VCR units.
Instructions for programming the remote to control a cable box.
Instructions for programming DSS/satellite receivers.
Instructions for programming DVD or LD players.
Instructions for programming CD or MD players.
Instructions for programming tuner/receivers.
Instructions for programming amplifiers.
Instructions for setting up cassette decks using AUX1 key.
Instructions for setting up home automation devices using CD key.
Instructions for setting up digital audio tape using AUX1 key.
Instructions for setting up turntables using CD key.
Instructions for setting up video accessories using CBL/SAT key.
Instructions for setting up misc. audio using AMP key.
Instructions on how to reassign device keys for other components.
Guide to find the four-digit code operating a component.
Configures the HOME THEATER key to control multiple devices.
How to teach new features to specific keys using IR learning.
How to set up sequences of key presses for later playback.
Procedure to remove saved timed sequences from memory.
How to record and play back a series of key presses with Macro keys.
Explains how to access advanced features mapped to other keys.
Instructions for using the sleep timer function.
How to assign a component to control the remote's volume.
How to map features from one device mode to another.
Resets advanced functions like macros and timed sequences.
Details on remote dimensions, weight, and battery type.
Common problems and their solutions for remote operation.
Explains various error messages displayed by the remote.
Explains functions of keys for TV operation.
Explains functions of keys for VCR operation.
Explains functions of keys for Cable Box operation.
Explains functions for DVD/LD/Cassette operations.
Explains functions for DSS/Satellite operations.
Explains functions for Receiver/Tuner operations.
Explains functions of keys for Amplifier operation.
Explains functions of keys for CD Player operation.
Explains functions for Home Automation devices.
Terms and conditions of the product's limited warranty.
To Next Page