7
SETUP
SIMPLESET
SETUP BY CODE
4. Hold down the digit for your brand and device as
listed in the tables above - e.g. 3 for a LG TV.
5. The remote will send the Power key every 3 seconds, but if
your device does not have a Power function (for example a
streaming box like Apple TV) the remote will send the Play/
Pause function.
6. As soon as your device reacts by turning o or Pausing
(Streaming box only) release the digit.
7. The LED will blink twice and the remote should now operate
your device.
• If you nd one or more keys do not work as you expect, start again at
step 2 – the remote will start with the next code in the memory.
If the brand of your device is not listed in the SimpleSet feature, you
can set up by trying codes individually. To do this rstly locate your
brand in the Code List. Codes are listed by brand and device, and in
order of popularity.
1. Turn on your device (not on standby) and point the Essential
remote towards it.
2. Press the Device key you wish to set up (for
example TV)
3. Hold down the Setup until the LED under the
Device key blinks twice
4. Enter the rst 4 digit code listed for your brand (e.g.
1840 for LG).
5. The LED will blink twice on the last digit of the code.
6. Now aim the remote towards your device and press
the Power key.*
7. If the device turns o your remote is ready to use. If not, repeat
steps 2-6 with the next code in the list.
* Note: If your original remote did not have a Power key, try testing
with a dierent key at step 6. For example try pressing Play or Pause
when setting up and streaming box and see if the box responds.
712836 Essential-8 Manual URC3680 RDN1100920 incl. Codelist.indd 7712836 Essential-8 Manual URC3680 RDN1100920 incl. Codelist.indd 7 10-09-2020 17:5410-09-2020 17:54
To Next Page
Loading...
