One Stop Gardens 95690 User Manual

One Stop Gardens 95690

10 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SPRAYER

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright

©

2007 by Harbor Freight Tools

®

. All rights reserved. No portion of this manual or any artwork

contained herein may be reproduced in any shape or form without the express written consent of Harbor

Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,

actual product may differ slightly from the product described herein. Tools required for assembly and service

may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

MODEL 95690: 2 GAL. TANK CAPACITY

MODEL 95692: 1.25 GAL. TANK CAPACITY

Revised Manual 09j

Table of Contents

Questions and Answers:

S
Samantha ThomasAug 9, 2025
What to do if my One Stop Gardens Paint Sprayer does not spray?
- J
  jenniferlunaAug 9, 2025
  If your One Stop Gardens Paint Sprayer isn't spraying, there are several possible solutions: * Ensure there's enough liquid in the container. * Pump the pump handle to pressurize the system (without squeezing the lever on the spray gun assembly). * Check that the pump handle is tightly secured to the container. * Verify all connections to the container are secure. * Make sure the spray head nut is free of dirt and debris.
A
Albert WilsonAug 22, 2025
Why is the spray pattern undesirable on my One Stop Gardens Paint Sprayer?
- M
  Ms. Laura GarrettAug 22, 2025
  An undesirable spray pattern from your One Stop Gardens Paint Sprayer could be due to a couple of reasons. First, ensure that the spray head nut is clear of any dirt or debris. Second, make sure that the sprayer is fully pressurized.

One Stop Gardens 95690 Specifications

General

Brand	One Stop Gardens
Model	95690
Category	Paint Sprayer
Language	English

Summary

General Safety Rules

Important Safety Instructions

Read and understand all instructions. Failure to follow instructions may result in serious personal injury.

Personal Safety

Stay Alert and Use Common Sense

Stay alert, use common sense, and avoid operating tools while tired or under influence of drugs/alcohol.

Proper Attire and Hair Restraint

Wear Appropriate Protective Gear

Wear ANSI-approved safety goggles, respirator, gloves, and proper safety clothing.

Service and Maintenance

Qualified Service Personnel

Product service must be performed only by qualified service technicians to avoid injury.

Use Identical Replacement Parts

Specific Safety Rules

Liquid Compatibility

Use only water, liquid fertilizers, herbicides, pesticides. Never spray flammable liquids.

Chemical Handling Precautions

Follow chemical label and EPA regulations. Clean sprayer with recommended agents.

Nozzle Safety

Operating Instructions

Prepare for Filling

Prior to filling, release any pressure within the container using the Safety Release Valve.

Filling the Container

Fill the tank with the specified amount of liquid and secure the Pump Handle.

Pressurizing the Sprayer

Pump the Pump Handle to build sufficient pressure until increased tension is felt.

Spraying Procedure

Re-pressurizing During Use

Refilling the Container

Post-Spraying Procedures

Inspection, Maintenance, and Cleaning

Depressurize Before Servicing

Always de-pressurize the system by pulling up the Safety Release Valve before servicing.

Pre-Use Inspection

Cleaning the Sprayer

Troubleshooting

Unit Does Not Spray

Check liquid level, pressurize system, secure pump handle, check connections, clean spray head nut.

Undesirable Spray Pattern

Related product manuals

One Stop Gardens 95143

BACKPACK SPRAYER 94573