One Touch KC32 - CLEANING AND STORAGE; Technical Specifications

12
© 2008 Daka Research Inc. All rights reserved.
www.one-touch.fr
Technical Specifications
Dimension: 170 x 80 x 80 mm
Storage Temperature: 4ºC to 40ºC
Battery: 4 x AA (LR6) alkaline batteries
CLEANING AND STORAGE
1. All parts, except the Main Body and the Shaft, are completely water
and dishwasher safe.
2. Clean the Main Body and Shaft by using a damp cloth. Never immerse
the Main Body, and the Shaft in water or any liquid.
3. Cheese Pusher and Spring Assembly can be removed from the Main
Body for cleaning. Firstpull the Cheese
Pusher out from the Main Body, then
pull the Spring Assembly out from the
Main Body. (Fig. 12)
4. For safety, remove Blade from Cheese
Holder and store inside the Storage Box.
5. All parts can be stored inside a
refrigerator but not a freezer.
6. Store the unit out of reach of children.
7. Always remove batteries when storing
the unit for long periods of time.
NOTE: Do not use abrasive materials
for cleaning.
8. Do not disassemble Spring Assemblies.
3. Press the Start Button again to stop
the operation when you finish
grating.
4. The Storage Box Lid can also be used
to cover the bottom of the Cheese
Holder.
fig.12
fig.11
Disposal
The packaging material can be recycled. Please dispose of it in an
Environmentally friendly manner and take it to a recycling centre.
If you wish to dispose of this equipment at any point, please also do so in an
environmentally friendly manner. It should not be disposed of alongside
general household waste. Instead, please take it to recycling point for
electrical goods. Your local council will be able to advise you further.
Batteries should not be thrown away in household waste. Please ensure that you
always dispose of batteries and rechargeable batteries only when they are empty. Your
local council will be able to advise you further.
Customer service center:
Siguret Concept
8 Rue Saint Bernard
75011 - Paris - FRANCE
www.one-touch.fr
Telephone: 33 1 47 21 21 85
e-mail: siguret@siguret.net