One Touch X100 HSDPA USB MODEM
2
(1) (2) (3)
Connect WIRELESS USB MODEM to PC
1. Insert the MODEM into a USB port of computer, to achieve USB power supply
of MODEM.
2. Installation program should run automatically after the
MODEM inserted into the computer correctly; in case of failure
of automatic run, please open MODEM memory via Icon of My
Computer in Windows OS, and double click it to begin
installing. Do not disconnect the MODEM during installation;
3. Program should run automatically if installation is completed.
3 Connect to Internet
Establish connection
1. Clicking on main interface to connect Internet, of which operation change
to ;
2. Internet connection is established successfully if connection information
window ejects.
Please check APN setting if connection failed. (Refer to the section of custom
connection in Help.)
Disconnect
Click on main interface to disconnect Internet.
To Next Page
Loading...
General