One Touch X100 - User Manual

To Next Page

One Touch X100 HSDPA USB MODEM

1 About WIRELESS USB MODEM

WIRELESS USB MODEM is a kind of Internet equipment customized for mobile

working and entertainment, which allows the user connect to Internet

conveniently.

2 Installation

Insert (U)SIM card

1. Open USB cover;

2. Remove product cover;

3. Correctly insert (U)SIM into the slot according to direction shown in figure,

and confirm that (U)SIM has been inserted completely.

(1) (2) (3)

Insert T-flash card

1. Open USB cover;

2. Remove product cover;

3. Push T-flash card slot and pull out with narrow indicator. Then insert T-flash

card into the slot according to direction shown in figure, and confirm that T-flash

card has been inserted completely.

Note: T-flash slot is placed under the (U)SIM slot. Before inserting T-Flash card,

(U)SIM card should be removed, if present.

Need help?

Do you have a question about the One Touch X100 and is the answer not in the manual?

Summary

About Wireless USB Modem

Installation Guide

Insert SIM Card

Instructions for inserting the (U)SIM card into the modem correctly according to visual guides.

Insert T-Flash Card

Steps to insert a T-flash card into its slot, noting its position relative to the (U)SIM slot.

Connect Modem to PC

Connect to PC USB Port

Connect the modem to a computer's USB port for power and initial connection.

Install Modem Software

Instructions for automatic software installation or manual launch from modem memory.

Connect to Internet

Establish Internet Connection

Steps to connect to the internet via the main interface and confirmation of successful connection.

Disconnect Internet

How to disconnect from the internet using the main interface.

Indicator Light Guide

Important Attention Points

FCC Regulations and Compliance

FCC Radiation Exposure Compliance