4/16
Electronic Dartboard Operation
1. Press the POWER to activate dartboard. A short musical introduction is played as the
display goes through power-up test.
2. Press GAME button until desired game is displayed.
3. Press DOUBLE button (optional) to select starting and/or ending on Double or Master
Out (used only in 301 - 901 games). This is explained in the game rules section.
4. Press PLAYER button to select the number of players (1, 2 ... 8). The default setting is 2
players. Or select iMATCH option by pressing iMATCH button.
5. Press START/HOLD button (red) to activate game and begin play.
6. Throw darts: When all 3 darts have been thrown, a voice command will indicate “Remove
Darts” and the score will flash. The darts can now be removed without affecting the
electronic scoring. When all darts are removed from the playing surface press the
START button to go to next player. Voice command will indicate which player is up. Also,
the player indicator lights will illuminate to show which player’s turn it is.
Caring for your Electronic Dartboard
1. Never use metal tipped darts on this dartboard. Metal tipped darts will seriously
damage the circuitry and electronic operation of this dartboard.
2. Do not use excessive force when throwing darts. Throwing darts too hard will cause
frequent tip breakage and cause excess wear on the board.
3. Turn darts clockwise as you pull them from the board. This makes it easier to remove
darts and extends the life of the tips.
4. Use only the A/C adapter that comes with the dartboard. Using the wrong adapter may
cause electrical shock and damage to the electronic circuits.
5. Remove the batteries when not in use or if using the optional A/C adapter. This will
prolong the life of your batteries.
6. Do not spill liquids on the dartboard. Do not use spray cleaners, or cleaners that
contain ammonia or other harsh chemicals as they may cause damage.
To Next Page
Loading...