14
EN
OPERATION
Before washing
1. Plug the device into a grounded wall socket.
2. Lay down the discharging tube to assure good discharging.
3. Insert the plug into the socket.
4. Connect the water introducing tube: insert the introducing water elbow
into the water gate on the washing machine until you hear the click.
Washing instruction:
1. Filling water
Fill with water to the desired uid level, either 40 or 48 Litres of water
(see table on the next page). The water has to be lled in by hand - either
with a bucket or a hose.
2. Adding wahing powder:
Selecting the washing time. For the detailed information, refer to
“Washing instructions”.
3. Putting in washing clothes
The clothes put into the tub will decrease the water level. Add more water
in time if necessary.
4. Selecting water ow
As for the details, please refer to the “Washing Instructions“.
5. Drain water after washing.
Washing Half-way drain Cleaning
After washing
1. Discharge the water completely.
2. Pull the mains plug.
3. Open the lid and let the tub dry in the air.
4. Take out the de-hair device inside the machine and clean it.
To Next Page
Loading...
