OneControl Minimal Series User Manual

User's Manual
Minimal BJF Buffer Split
Thank you for your purchase of the Minimal BJF Buffer Split by One Control.
BJF Buffer Split is a configurable gadget, which has a built-in guitar buffer which is
designed by Bjorn Juhl, it can be setup as AB box, Latch type footswitch, 1Loop box or
signal splitter.
Signal chain: Input -> buffer (on/off) -> send -> return -> output B

OneControl Minimal Series Specifications

General

Bypass	True Bypass
Series	Minimal Series
Number of Footswitches	1
Input Impedance	500 kΩ
Output Impedance	10 kΩ
Type	Guitar Effects Pedal
Power Supply	9V DC
Weight	160 g

Summary

Product Overview and Signal Chain

Input and Output Connections

INPUT

Connect your instrument here for signal input.

RETURN

Connect to the output of a guitar pedal when used as a 1loop box.

OUTPUT A N.C./ SEND

Jack functions as 'loop send' or 'normally open'/'OUTPUT A'.

OUTPUT B / N.O.

Jack serves as the general output or B output jack.

Function Configuration Switch

SPLIT/1LOOP BOX Mode

Configures the unit as a 1loop box or a signal splitter.

FS / AB BOX Mode

Sets the unit as an AB box or latch footswitch for amp switching.

Usage Tutorials

Buffer Pedal

Illustrates the unit's operation as a standard buffer pedal.

Signal Splitter

Diagram showing the unit used to split the signal to two outputs.

AB BOX

Demonstrates the unit's functionality as an AB signal switcher.

1LOOP BOX

Illustrates how to use the unit as a single loop switcher.

Advanced Configurations

Input Selector

Diagram showing the unit configured as an input selector for guitars.

Latch Footswitch

Illustrates the unit functioning as a latch footswitch for amp switching.

Specifications