Troubleshooting
Problems
Cannot be
turned on
Weak suction
The Pet Clippers
heats up during use
The hose is broken
Whistle-like noise
when the machine
is running
Possible Causes
Plug not been inserted well
Switch not been turned on
Flexible hose is clogged
Dust cup is too full
Filter is dirty
Internal parts of the machine
have debris
Accidental damage
Bitten by pets at home
The Dust Cup snap
is not aligned
Solutions
Reinsert the plug
Press switch buttonto turn
it on
Clean flexible hose andsuction
mouth
Empty dust cup
Clean filter
Please remove the blade.
Wash and oil
The hose is detachable and
can be stored in the bag we
provided
Please check whether
the Dust Cup is installed
If the above solutions do not solve the problem, please stop using the
product, and contact our customer support: support@oneisall.com
NOTE
The product is equipped with voltage protection device. If you hear a "didi"
sound when you press the switch, and the gear lights are all flashing, it
means that the machine voltage is not consistent. Please check your volt-
age. If you have any problems, please contact us at any time with our email
support@oneisall.com
13
To Next Page
Loading...
