Settings
Tap & pay
Go to Settings > Bluetooth & device
connection > Tap & pay
Before using the tap and pay, you need to set
up the default payment app, open the payment
service in the app, and set the tap and pay
feature with the following settings options:
Payment default: Choose an app, such as
Google pay, to use when making a payment
by tapping the payment terminal.
Use default: You can set as Always and
Except when another payment app is open.
Display
Go to Settings > Display to customize the
screen display settings.
⚫ Adaptive brightness: Optimize brightness
level for available light. When this feature is
on, you can still manually adjust the slider bar
below to adjust brightness temporarily.
⚫ Sleep: After the time is set, the screen will
turn off automatically when the device is not
in use.
⚫ Screen calibration: The color mode of the
screen can be adjusted here. You can select
Vivid, Natural, Advanced (including
AMOLED Wide Gamut, sRGB, Display P3,
adjust the color temperature manually)
⚫ Resolution: The display resolution of the
screen can be adjusted here, there are 3
options to choose from:
➢ Auto switch: Switch to the appropriate
resolution automatically.
To Next Page
Loading...
