5. The Backlight
4. The Layers
There are key setting layers on the
keyboard. Layers 0 and 1 are for MacOS,
layers 2 and 3 are for Windows.
If your system toggle is switched to Mac,
then layer 0 will be active.
Press fn + Q to change the lighting effect Press fn + Tab to toggle the backlight on/off.
If your system toggle is switched to
Windows, layer 2 will be active. Note: If
you are using the keyboard in Windows,
please ensure layer 2 is active instead of
layer 0. This is a common mistake.
To Next Page
Loading...