1.QR code: Scan the QR code and connect to this Wi-Fi network.
2.Personal hotspot password: Go to Personal hotspot settings >
change the Name and Password.
⚫ Personal hotspot settings ： Set personal hotspot name and
password.
* You must make sure that the option Visible to Other Devices is
turned on so that this hotspot can be connected manually.
* Wi-Fi 6 hotspot: A Wi-Fi 6 hotspot provides a faster connection, but
you might be unable to find this hotspot on older devices.
⚫ Connection management：The maximum allowed connections and
the data restriction can be set.
⚫ Automatically turn off personal hotspot when idle: when no
devices are connected for 10 minutes.
USB tethering
To share your device's mobile data or Wi-Fi network with your
computer via USB, follow the steps below:
1. Connect your phone to your computer with a USB cable
2. Select the USB connection method as USB tethering in the control
To Next Page
Loading...
