Onespace 50-JN01 - Parts and Hardware List; Cleaning and Care; Replacement Parts

HARDWARE KIT
STOCK # 51-JN01HA
PART
DESCRIPTION
QTY
STOCK NO
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED.
THE PART WILL
NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
1
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
51-JN01LB
Laptop Board
A
1
51-JN01MB
Mouse Pad Board
B
1
51-JN01BS
Base
C
1
51-JN01BSP
Center Bar
D
1
51-JN01TSP
Top Support
E
2
51-JN01BR
Support Bar
F
PART
DESCRIPTION
QTY
STOCK NO
51-JN01CV
Base Cover
I
51-JN01PA
Pivot Anchor
J
1
K
M
PART
DESCRIPTION
QTY
PARTS AND HARDWARE LIST (50-JN01)
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
51-JN01TK
Tilt Knob
2
51-JN01SK
Support Knob
N
3
51-JN01CA
Caster
G
2
51-JN01CAL
Locking Caster
H
51-JN01UB
1
U Bracket
Washer
Wrench
Allen Key
Extra Hardware Pack
(1-5)
M6 Nut
1
1
3 OF 7
M6X35MM
M6X23MM
M6X12MM
1
2
3
4
5
6
6
4
4
2
6
7
1
1
1