103
Troubleshooting your system
8
What it means
One of the following may
apply:
• Not enough blood or
control solution was
applied or was added after the meter began to count
down.
• The test strip may have been damaged or moved
during testing.
• The sample was improperly applied.
• There may be a problem with the meter.
What to do
Repeat the test with a new test strip. See page36 for
taking a blood glucose test, or page70 for taking a
control solution test. If the error message appears again,
contact Customer Service. Contact LifeScan Customer
Service at: service@LifeScanMEA.com.
To Next Page
Loading...
