24
2 Setting up your system
Setting up your meter
Turn your meter on
To turn your meter on, press
and hold until the start-
up test screen appears. Once
the device is on, release .
You can also turn the meter
on by inserting a test strip.
CAUTION:
If you see any missing segments within the start-up
screen, there may be a problem with the meter. Contact
Customer Service. Contact LifeScan Customer Service at:
service@LifeScanMEA.com.
NOTE: If you turned the meter on for the first time by
inserting a test strip instead of pressing
, you will not
be able to perform a glucose test until you complete the
first time setup.
Every time you turn your meter on, a start-up screen will
appear for a few seconds. All segments of the display
should appear briefly, indicating your meter is working
properly. If the meter does not power on, check the
battery.
To Next Page
Loading...
