OneTouch Select Plus Flex - Viewing Control Solution Results

74
3
Taking a test
Viewing your control solution result
After the control solution
is applied, the meter will
count down until the test
is complete. Your result is
displayed along with the
date, time, unit of measure,
and
(for control solution) and stored in the meter.
Control solution results can be seen when reviewing past
results on the meter.
CAUTION: Make sure you press and hold or
until the control solution icon appears before you
begin a control solution test. An screen may appear
if you applied control solution to the test strip without
following the steps beginning on page70. See
page104 for more information.