OneTouch Select Plus Flex - Page 86

84
5
Editing Your Settings
1. Review the pre-set low range limit displayed
• To accept the pre-set low
range limit, press
.
• To edit the pre-set low
range limit, press
or to change the
value between
60mg/dL-110mg/dL,
and then press .
2. Review the pre-set high range limit displayed
• To accept the pre-set high
range limit, press
.
• To edit the pre-set high
range limit, press
or to change the
value between
90mg/dL-300mg/dL,
and then press .
Your meter will exit settings mode and your last result
screen will appear.