87
6
Caring for your system
• Do Not use alcohol or any other solvent.
• Do Not allow liquids, dirt,
dust, blood or control
solution to enter the test
strip port or the data port.
(See page18.)
• Do Not spray cleaning
solution on the meter or
immerse it in any liquid.
1. Holding the meter with the test strip port pointed
down, use a soft cloth dampened with water and mild
detergent to wipe the outside of the meter and lancing
device
Be sure to squeeze out any
excess liquid before you wipe
the meter. Wipe the outside of
the cap.
To Next Page
Loading...
