OneTouch ULTRA2 - MANUAL 2 - Page 8

5
SETTING UP YOUR METER

Set the date
In the DATE SET UP screen, press or to change the rst value and press .
Press or to change the second value and press .
Press or to change the year and press .

Set the time format
Press or to select the time format you prefer—AM/PM or 24 HR, and press .

Set the time
Press or to set the hour and press . Press or to set the minutes and press .
If you selected the AM/PM time format, press or to select AM or PM. To conrm your selection,
press .
8
Confirm your settings
The choice YES will be highlighted at the bottom of the screen. If your settings are correct, press to
conrm and save the settings and return to the MAIN MENU.
 WARNING: The unit of measure mmol/L must be displayed here. If your display shows mg/dL rather than mmol/L,
contact the OneTouch® Customer Care Line at 1 800 663-5521. You cannot change the unit of measure. Use of the wrong
unit of measure may cause you to misinterpret your blood glucose level, and may lead to incorrect treatment.