18 Customer Service 1 800 227-8862
Getting a blood sample
2. Insert a sterile lancet into the OneTouch
®
UltraSoft
®
Blood Sampler
Insert the lancet into the holder and push in firmly. Twist the protective
disk until it separates from the lancet and save the disk for later use.
Do not twist the lancet.
3. Replace the blue cap by twisting it back on until it is snug
4. Adjust the depth setting
If necessary, twist the depth adjustment
knob toward the smaller dots on the
OneTouch
®
UltraSoft
®
Blood Sampler for a shal-
low puncture or toward the larger dots for a
deeper puncture.
DCO_06344502A_OU2_OB_USe.qxd 3/13/07 11:52 AM Page 18
To Next Page
Loading...
