Customer Service 1 800 227-8862 43
Control solution testing
Performing a control solution test
Start with the meter off. If you have turned the
meter on to change settings or review past
results, turn it off.
1. Check the code on the test strip vial before
inserting the strip
2. Insert a test strip to turn on the meter
Make sure the three contact bars are facing you.
Push the strip in as far as it will go. Do not
bend the strip.
DCO_06344502A_OU2_OB_USe.qxd 3/13/07 11:52 AM Page 43
To Next Page
Loading...
