Battery
Your OneTouch
®
UltraEasy
™
Meter uses one 3.0 Volt CR 2032 lithium battery
(or equivalent). Replacement batteries can be found in most stores where batteries
are sold. Your meter comes with the battery already installed.
The meter shows a battery icon in the far right-hand side of the display to indicate
the condition of the battery.
35
Caring for your system
When the battery icon first appears along with
the unit of measure, there is enough power for a
minimum of 100 more tests. You should replace
the battery as soon as possible.
When the battery icon appears by itself, there is
not enough battery power remaining to perform a
test. You must install a new battery before using
your meter.
Replacing the battery
Step 1
Remove the old battery
Start with the meter off. Open the battery door and pull up on the
battery ribbon.
DCO_06397001C_OTUE_OB_GB.qxd 4/13/07 3:18 PM Page 35
To Next Page
Loading...
