OneTouch Verio Flex - Page 4

4
Q4: How do I set the time and date
on the OneTouch Verio Flex™ meter?
A4: When the device is first switched on, it will
automatically prompt you to set the time and date.
The SET icon will appear on the screen to indicate
that the meter has entered setup mode.
Setting the time:
Hour will flash…
• If the hour displayed is correct,
press ‘OK’ to confirm.
• If the hour displayed is not correct,
press
or to change the hour
and press ‘OK’ to confirm.
Minutes will flash…
• If the minutes displayed are
correct, press ‘OK’ to confirm.
• If the minutes displayed are not correct,
press
or to change the
minutes and press to confirm.
AM/PM will flash…
• If the AM/PM displayed is correct, press ‘OK’ to confirm.
• If the AM/PM displayed is not correct, press
or
to change AM/PM and press ‘OK’ to confirm.