EasyManua.ls Logo

Oneway Bowl Steady User Manual

Oneway Bowl Steady
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Date Purchased:
Manufactured parts on this ONEWAY product are backed by a warranty period
of
5 years from the date of purchase.
The Wheels and Bearings are not covered under this Warranty.
ONEWAY hereby agrees to repair or replace, any defects due to faulty material
or workmanship, provided that:
1. The warranty period has not elapsed. Proof of purchase date (sales receipt
etc.) is required prior to any repair taking place.
2. The product has not been altered or modified in any way.
3. The product has not been subjected to misuse, abuse, negligence, or was
not used strictly in accordance with these instructions.
4. Transportation costs incurred in returning the product to ONEWAY
Manufacturing is pre-paid by the customer.
This warranty does not cover any costs or damages arising directly or indirectly
from the operation of this product.
No other guarantee, written or verbal, is authorized by ONEWAY
Manufacturing.
Our policy is one of continuous improvement. We therefore reserve the
right to change the specification and/or design without notice.
Bowl Steady
Instructions
Tension Arm Assembly
Wheels (2)
1¼” Post
Base
Hardware Package
Clamp Block (lathe specific)
Note: Clamp Block may be packaged separately
Contents Of Package
Part No. 3248
1-8 0 0 -56 5 - 7288
Quality products, designed by Woodturners for Woodturners!
www.oneway. c a
291 Griffith Road Unit 1, Stratford, ON,
N5A 6S4, Canada
Phone: 1-519-271-7611
Fax: 1-519-271-8892
E-Mail: postbox@oneway.ca
Interested in turning Spindles?
Manufacturers Warranty
An accessory head is available to turn your
Bowl Steady Rest into a Spindle Steady
Rest!
This head uses a scissor-like action to
clamp around the spindle, and is very easy
to setup and use. Simply move the Post
forward, attach the head, and start turning.
Reducing the vibration along a spindle
means a nicer finish to the piece (i.e. less
time spent sanding) and a safer, more
pleasurable turning experience.
Spindle Steady Head Part No. 3308
Version 3.2 December 2010
Question and Answer IconNeed help?

Do you have a question about the Oneway Bowl Steady and is the answer not in the manual?

Oneway Bowl Steady Specifications

General IconGeneral
BrandOneway
ModelBowl Steady
CategoryTools
LanguageEnglish

Summary

ONEWAY Bowl Steady Manufacturers Warranty

ONEWAY Bowl Steady Assembly Instructions

Step 1: Assemble Wheels to Tensioning Arms

Assemble wheels to tensioning arms using socket head cap screws for a secure fit.

Step 2: Assemble Tube to Base Plate

Attach the tube to the base plate using four socket head cap screws.

Step 3: Attach Tensioning Bar Assembly

Connect the tensioning bar assembly to the post and adjust height.

How to Use the ONEWAY Bowl Steady

Bowl Steady Usage Notes

Experiment with placement for best results; thinner bowls benefit more.