Operation Instructions
1. For use with devices running Android 7 or higher, Windows 10 or Mac
OS, XI1 works as a plug-n-play device, without any need to install
additional drivers. For use with Windows 8, 7 or XP, please download
dedicated USB drivers from ONIX official website.
3. XI1 is completely powered through the USB input, consuming only
small amount of power from the connected device. XI1 might get
slightly warm during usage, this is not a malfunction and it does not
affect performance.
2. For use with certain devices, such as gaming consoles or older
Android devices, XI1 must be switched to a basic UAC1.0 USB mode.
For such devices, please hold down the Multifunctional Button on the
XI1 while connecting it to the device.
4. For use with iOS devices, a special USB-C to Lightning cable is needed.
Note: Due to differences in Android systems used by different
manufacturers, some devices might demand additional settings
and some devices might not support such connection.
5
XI1 Portable DAC/AMP Adapter
To Next Page
Loading...