Firmware Version Display
Volume -/+ " "Button ( Track Up/Down Mode)
• Single Press: Previous / Next track.
• Long Press: Fast Forward / Rewind.
(Needs to be supported by Playback software and Connected Device)
Note: In UAC 1.0, buttons work in DAC Volume Mode. In UAC 2.0, button
functions depend on the connected device and chosen Key Mode.
Factory reset
Press and hold Multifunctional Button for 10 seconds to perform factory
reset of the device. Display should show "Factory Reset...".
Font Settings
8 different fonts are available in the settings menu. Access the Settings
menu, move to "Set Font" and use the Volume - or Volume + button to
cycle between available fonts.
7
XI1 Portable DAC/AMP Adapter
Set the device to UAC1.0 mode. Then enter settings and navigate to
"Firmware".
To Next Page
Loading...