After Sales Support
(AU) 1300 886 649 | tempo.org/support
33
Other Useful Information (Cont.)
WARNING!
Make sure to reinstall the drain pump filter and close the cover panel securely,
otherwise water may leak.
CAUTION: If you are checking the drain pump after a hot water wash, wait until any
residual water has cooled to a safe level.
1. Open the lower cover (Fig. 18).
2. Placeacontainerunderneaththedrainpumplterwhenremovingit,andalways
keep a rag nearby to dry up any water spillage.
3. Removethelter,unscrewingitanticlockwise(Fig.19andFig.20).Anyresidual
water will drain out.
4. Removeanyforeignobjects.Cleantheltercarefullywithwaterandasoftbrush
(Fig. 21).
5. Screwthelterplugbackintoposition,andclosethedecorativecover.
6. Closethepumpltercoverandsecureitwiththescrew.
Fig. 18
Fig. 20
Fig. 19
Fig. 21