Onix T624W100DA2b - User Manual

Quick Start Guide - Heated Throw
This is a Quick Start Guide Only. It is Important that you read the
Instructions fully for Safety and Correct operation of your product. Failure to
do so may result in Damage or Personal Injury.
1 2
Ensuring there are no creases or folds, wrap
the Heated Throw around your body or drape
over your legs.
Ensure the Controller is on the outside of the
Throw. DO NOT COVER the controller
Ensure the detachable plug on the Throw is
fully inserted and locked.
Allow cables to hand freely. DO NOT BEND,
KINK, TRAP or PINCH the cables.
DO NOT Sleep while using this product.
DO NOT use this product as an electric under
or over blanket.
DO NOT use in bed.
Fully unravel the cables and Insert Plug into
Power Point and switch on.
3 4
Heat Settings
0 = Off
1 = Low Heat
2 = Medium Heat
3 = High Heat
0 = Off
DO NOT Sleep while
using this product.
DO NOT use on heat
setting 3 continuously.
Turn down to setting 2
or 1 when warm enough
Controller will turn of
automatically after
approx. 3 hours.
Do not leave unattended when switched on.
Turn the heat setting to position “O” (off) then
Turn power off and Unplug at the wall.
Always Unplug when not in use
Store in dry place when finished.
Refer to “Recommended Cleaning
Instructions” section for directions on
cleaning the product.
DO NOT COVER CONTROLLER
When using the Throw, some people may be susceptible to a tingling sensation when alone or
when touching someone else using the Throw.
This “Tingling” feeling is known as an “electric field effect” and is occasionally known to happen
across all makes and brands of Throws. It is caused by the current flowing through the element
creating an Electromagnetic Field (EMF). Some people are more susceptible to feeling this EMF
tingling sensation than others. This is no cause for concern and is in no way an electric shock.
0
3
2
1
0

Summary

Important Safeguards

General Safety Precautions

Covers essential safety advice including voltage checks, reading instructions, cord integrity, and proper usage to prevent damage or injury.

Connecting the Controller

Overheat Protection

Using The Controller

Controller Operation and Heat Settings

Details on selecting heat settings using the slide knob and indicator lights, plus important usage restrictions and warnings.

Using Your Heated Throw

Recommended Cleaning Instructions

Treatment For Localised Soiling

Provides specific instructions for spot cleaning minor stains using mild detergents and cold water, avoiding harsh chemicals.

Hand Washing

Step-by-step guide for hand washing the heated throw in cold water with mild soap, emphasizing gentle handling and no wringing.

Drying Instructions

Details on how to dry the heated throw, emphasizing drip drying in a shady area and avoiding direct heat or wringing.

Servicing Your Heated Throw and Controller

Electrical Schematic Diagram

Troubleshooting

Troubleshooting Table

A table listing common problems, their causes, and recommended remedies for the heated throw and its controller.

Warranty Information

Onix T624W100DA2b Specifications

General

Brand	Onix
Model	T624W100DA2b
Category	Accessories
Language	English