7
Using the RI Dock
1. Plug in the AC adapter.
2. Turn on your amp, and select the appropri-
ate inputs on your amp.
3. Align your iPod with the RI Dock’s iPod slot,
and carefully place your iPod in the slot, as
shown.
■ Adjusting the iPod Adapter
The iPod adapter needs to be adjusted to
match your particular iPod. If there’s a gap
between the back of your iPod and the adapter,
turn the adapter counterclockwise to close the
gap. Turning the adapter counterclockwise
moves it forward. Turning it clockwise moves it
backward.
■ Basic Operation
•System On Function
When you turn on your amp, the iPod turns on
as well. With some amps, you may need to
press the [ON] button on your amp’s remote
controller’s twice to turn on the other compo-
nents in your system.
•System Off Function
When you turn off your amp, the iPod turns off
as well.
•Auto Power On Function
*1
If you start iPod playback while your amp is on
Standby, your amp will automatically turn on
and select your iPod as the input source. Then,
your iPod will start playback.
•Direct Change Function
*1
If you start iPod playback while listening to
another input source, your amp will automati-
cally select your iPod as the input source.
•Timer Play
You can use your amp’s Timer function to turn
on your amp and iPod and start playback at a
specified time.
• Linked Dimmer Operation
When you use your amp’s Dimmer function to
change its display’s brightness, the brightness
of the RI Dock’s Power indicator will change as
well.
•Using Your Amp’s Remote Controller
You can use your amp’s remote controller to
control basic iPod functions (see page 9).
Putting Your iPod in the RI Dock
Remove your
iPod’s case
Forward
Backward
Notes:
•To prevent iPod connector damage, don’t
twist your iPod when inserting or remov-
ing it, and be careful not to knock over
the RI Dock while your iPod is inserted.
•Don’t use the RI Dock with any other iPod
accessories, such as FM transmitters and
microphones, because they may cause a
malfunction.
Function Overview
*1. If you use your iPod’s controls to start an iPod slideshow or
video, these functions will not work, so use the remote con-
troller instead.
Note:
•Your amp may take several seconds to
startup, so you might not hear the first
few seconds of the first song.
To Next Page
Loading...
Need help?
General
