Onkyo DX-C370 User Manual

11
6 DISC
FIVE CD EXCHANGE CONTINUOUS PLAY
OPEN/CLOSE
PLAY
POWER
OFF
STOPPAUSE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6
1
6
2
7
3
8
4
9
5
0
NEXT SELECTION
DISPLAY
+10
CUSTOM
FILE
ERASE
COMPACT DISC CHANGER DX-C540
ON
MEMORY CLEAR
DISC SKIP
/
/
Playing CDs
Skip playback
Use the / and / buttons.
You can also use the remote controller to operate the unit by
using the and buttons instead of the / and
/ buttons.
During playback, press the
/ button.
The CD changer will stop playing the current Track and will
begin playing the next track from the beginning.
During memory playback (see “Using memory functions” on
page 14), pressing this button will skip to the top of the next
memorized track or the next disc.
Pressing this button during random playback (see “Playing
back tracks at random” on page 13) will stop the playback,
and the unit will select the next song at random and start play-
ing it back.
During playback, press the
/ button.
The CD changer will return to the beginning of the current
track and will begin playing back the same track again. To
jump back to the previous track, quickly press the
/
button again before playback begins.
During memory playback, pressing this button will skip to the
top of the previous track or disc.
Pressing this button during random playback will locate the
top of the current track, not the previous track.
• The / button is disabled when the unit is playing
back the last track of the disc or the last stored track.
• When the first track of the disc (Track 1) or the first stored
track is being played back, the
/ button serves only
to locate the top of the track.
/ /
REMOTE CONTROLLER RC-331C
Checking the playing time of a track
When you press the / button, the display indicates
the playing time of the next track, in the order of the tracks
on the CD.
• When you press the / button, the display shows
the playing time of the previous track.
123
456
DISC No.
TRACK
REMAIN
SINGLE
123
456
DISC No.
TRACK
REMAIN
SINGLE
123
456
DISC No.
TRACK
REMAIN
SINGLE
/
/
/
STOP
Continuously listening to the beginning of
discs (Disc intro scan)
The “disc intro scan” function is particularly useful for quickly
checking the contents of discs.
To activate this function, press the DISC INTRO SCAN but-
ton on the remote controller.
The CD changer will play back only the beginning of each
disc for about eight seconds.
REMOTE CONTROLLER RC-331C
DISC
INTRO SCAN

Onkyo DX-C370 Specifications

Audio Specifications

number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)
dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)
wow and flutter	Below threshold of measurability

Power

power consumption	10 watts
power supply	120 V, 60 Hz
power supply (alternative)	230V, 50 Hz
power supply (switchable)	220-230V/120V switchable, 50/60 Hz
output level	2 volts r.m.s.

Technical Specifications

signal readout system	Optical non-contact
reading rotation	About 500 - 200 r.p.m. (constant linear velocity)
linear velocity	1.2 - 1.4 m/s
error correction system	Cross Interleave Reed-Solomon code
D/A converter	1 bit PWM/ACCUPULSE
sampling frequency	352.8 kHz (8 times oversampling)

Weight and Dimensions

dimensions	435× 131× 433mm (17-1/8" × 5-3/16" × 17-1/16")
weight	6.9 kg (15.2 lbs.)