Onkyo DX-C370 User Manual

9
DISPLAY
123
456
DISC No.
TRACK
SINGLE ELAPSED
123
456
DISC No.
TRACK
SINGLE
REMAIN
123
456
DISC No.
TRACK
REMAINTOTAL
b
d
a
c
6 DISC
FIVE CD EXCHANGE CONTINUOUS PLAY
OPEN/CLOSE
PLAY
POWER
OFF
STOPPAUSE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6
1
6
2
7
3
8
4
9
5
0
NEXT SELECTION
DISPLAY
+10
CUSTOM
FILE
ERASE
COMPACT DISC CHANGER DX-C540
ON
MEMORY CLEAR
DISC SKIP
STOP
PAUSEDISPLAY
/
/
Playing CDs
Search play
Hold down the / button to fast forward the cur-
rent track during playback.
Hold down the / button to fast reverse the current
track during playback.
Release the
/ or / button when you reach the
point on the track you want to play back.
You can also use the remote controller to search by using the
and buttons instead of the / and /
buttons.
• The unit starts fast forwarding at 10-times speed, and after
four seconds at 60-times speed.
• During the fast forward operation, you will hear a cueing
sound at low volume.
• When the end of the disc is reached, the unit will play back
the next disc.
• If you locate the top of the disc, the unit will cancel the fast
forward operation and start playing back from the top of
the disc (Track 1).
Stopping playback temporarily
Press the PAUSE button.
The PAUSE indicator will light up. To resume playback, press
the
PLAY button, or press the PAUSE button again.
The CD changer starts playing again from exactly the point at
which it stopped.
Stopping playback
Press the STOP button.
• When you open the loading drawer, the disc that was play-
ing will be in the front disc tray.
PAUSE
STOP
/ /
REMOTE CONTROLLER RC-331C
Checking the elapsed or remaining time
Press the DISPLAY button during playback.
The display changes each time you press the DISPLAY but-
ton.
SINGLE ELAPSED: Indicates how long the current track
has been playing.
SINGLE REMAIN: Indicates how much time is left for
the current track. For beyond the 20th track, the unit dis-
plays “--: --”.
TOTAL REMAIN: Indicates how much time is left for the
entire disc to play. During memory play, this display indi-
cates the playing time remaining for the entire sequence of
tracks programmed into memory.
The display returns to SINGLE ELAPSED time display.
DISPLAY
DISPLAY
PLAY

Onkyo DX-C370 Specifications

Audio Specifications

number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)
dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)
wow and flutter	Below threshold of measurability

Power

power consumption	10 watts
power supply	120 V, 60 Hz
power supply (alternative)	230V, 50 Hz
power supply (switchable)	220-230V/120V switchable, 50/60 Hz
output level	2 volts r.m.s.

Technical Specifications

signal readout system	Optical non-contact
reading rotation	About 500 - 200 r.p.m. (constant linear velocity)
linear velocity	1.2 - 1.4 m/s
error correction system	Cross Interleave Reed-Solomon code
D/A converter	1 bit PWM/ACCUPULSE
sampling frequency	352.8 kHz (8 times oversampling)

Weight and Dimensions

dimensions	435× 131× 433mm (17-1/8" × 5-3/16" × 17-1/16")
weight	6.9 kg (15.2 lbs.)