EasyManuals Logo

Onkyo DX-C380 User Manual

Onkyo DX-C380
17 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Troubleshooting Guide Specifications
No power.
Cause: Power cable is not properly plugged into the AC outlet.
Remedy: Insert the power plug firmly.
A disc is loaded in the disc tray, but playback will not start.
Cause: A disc in the disc tray may be upside down.
Remedy: Load the disc with the label thcing upward.
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: Moislure has accumulated inside the CD changer.
Remedy: Remove the disc _?om the disc tray, place the CD
changer in a warm place, and leave the power on Ibr
about one hour.
No sound is heard.
Cause: Connections may be incomplele or incorrect.
Remedy: Check all cable connections. Insert all the plugs firmly
into the jacks.
Cause: The input selector switch on the amplifier may be set in-
correctly.
Remedy: Set the switoh to the proper position. See your amplifier's
operating instructions for more infbtmation.
Disc playback skips.
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: A disc is scralched.
Remedy: Replace the disc.
Cause: The CD changer is subject to being accidentally bumped.
Remedy: Place the CD changer in a more stable location.
Search time (when locating a specific track) is extremely long.
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: The disc is scratched.
Remedy: Replace the disc.
Track numbers cannot be stored in memory.
Cause: No disc in the tray.
Remedy: Load a disc in the tray.
Cause: You have entered a track number that does not exist on the disc.
Remedy: Use only the track numbers thal exist on the disc.
Front panel controls function correctly, but remote control-
ler does not.
Cause: No batteries in remote controller.
Remedy: Insert batteries.
Cause: Batteries have worn out.
Remedy: Replace batteries.
Because the unit contains a microcomputer to provide advanced fimcgons, it may
malfimction dueto _tomal noise or static electricity. Iftiffshappms%press the POWER
switch on the unit mid then press it in again after about fiveseconds.
Signal readout system:
Reading rotation:
Lineal"velocity:
Error correction system:
D/A converter:
Sampling frequency:
Number of channels:
Frequency response:
Total harmonic distortion:
Dynamic range:
Signal to noise ratio:
Channel separation:
Wow and Flutter:
Output level:
Power consumption:
Power supply:
Dimensions (W x H x D):
Weight:
Optical non-contact
About 500 - 200 r,p.m.
(constant linear velocity)
1.2 - 1.4 m/s
Cross interleave Reed-Solomon code
1 bit PWM/ACCUPULSE
352.8 kHz (8 times oversampling)
2 (stereo)
5 Hz - 20 kHz
0.005% (at 1 kHz)
96 dB
92 dB
92 dB (at 1 kHz)
Below threshold of measurability
2 volts r.m.s.
10 watts
120 V, 60 Hz
230V, 50 Hz
435x 131× 433mm
(17-I/8" × 5-3/16" x 17-1/16")
6.9 kg (15.2 lbs.)
Specifications and t?atures are subject to change without notice.
SN 29342883
ONlrt_O CORPORATION
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tek 072-831-8111 Fax: 072-833-5222
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramesy, N.J. 07446, U.S.A.
Tek 201-825-7950 Fax: 201-825-8150 E-mail: onkyo@onkyousa.com
ONKYO EUROPE ELECTRONICS GmhH
Industriestrasse 20, 82110 Germering, GERMANY
Tek 089-849-320 Fax: 089-849-3265 E-mail: info@onkyo.de
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower l, 223 Hing Fong Road, Kwai Chung,
N.T. HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
htt p://www, o nkyo co.l p/
10002-1 [_
This Manual: http://www.manuallib.com/onkyo/dx-c380-compact-disc-changer-manual.html

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo DX-C380 and is the answer not in the manual?

Onkyo DX-C380 Specifications

Audio Specifications IconAudio Specifications
number of channels2 (stereo)
frequency response5 Hz - 20 kHz
total harmonic distortion0.005% (at 1 kHz)
dynamic range96 dB
signal to noise ratio92 dB
channel separation92 dB (at 1 kHz)
wow and flutterBelow threshold of measurability
Power Specifications IconPower Specifications
power consumption10 watts
power supply120 V, 60 Hz, 230 V, 50 Hz
Physical Dimensions IconPhysical Dimensions
dimensions435× 131× 433mm (17-1/8" × 5-3/16" × 17-1/16")
weight6.9 kg (15.2 lbs.)
Optical and Digital Specifications IconOptical and Digital Specifications
signal readout systemOptical non-contact
reading rotationAbout 500 - 200 r.p.m.
linear velocity1.2 - 1.4 m/s
error correction systemCross Interleave Reed-Solomon code
D/A converter1 bit PWM/ACCUPULSE
sampling frequency352.8 kHz (8 times oversampling)
output level2 volts r.m.s.

Related product manuals