To Next PageTo Next PageWhy does my Onkyo DX-C390 CD Player have no sound?
If there's no sound coming from your Onkyo CD Player, make sure all connections are correct and properly connected. Also, verify that you've selected the correct input source on your amplifier.
Why is my Onkyo DX-C390 remote controller not working?
If the remote controller for your Onkyo CD Player isn't working, consider these possible causes: * The remote may need new batteries. * The batteries might be flat and need replacing. * The batteries might be incorrectly installed; check and correct their placement. * Ensure you're pointing the remote directly at the CD player's remote sensor. * You might be too far from the CD player; try moving closer (the remote's range is about 16 ft). * A strong light source could be interfering with the sensor; relocate the unit if necessary. * If the CD player is in a cabinet with colored glass doors, open the doors or use a cabinet without colored glass.
What to do if my Onkyo CD Player has no power?
If your Onkyo CD Player isn't turning on, the power cord might not be properly connected. Ensure the power cord is securely plugged into both the CD player and a functioning wall outlet.
Why does my Onkyo CD Player CD playback skip?
If CD playback skips, it might be due to vibration. Install the DX-C390 somewhere free of vibration. Also, remove the disc and clean it. If the disc is very scratched, consider buying a new one.
What to do if my Onkyo DX-C390 remote controller does not work?
If the remote controller isn't working, try the following: * Install or replace the batteries with new ones. * Ensure the batteries are correctly installed. * Point the remote controller directly at the DX-C390’s remote sensor. * Move closer to the DX-C390, as the remote has a range of about 5 meters (16 ft.). * Ensure that the DX-C390 is not subjected to direct sunshine or inverter-type fluorescent lights. Relocate if necessary. * If the DX-C390 is installed in a cabinet with colored glass doors, open the doors, or use a cabinet without colored glass.
Why digital outputs does not work on Onkyo CD Player?
If the digital outputs on your Onkyo CD Player aren't working, the sampling rate of the MP3 track might not be compatible. Select a track with a sampling rate of 32 kHz, 44.1 kHz, or 48 kHz.
How to fix CD playback skips on Onkyo DX-C390?
If your Onkyo CD Player skips during playback, it could be due to a few reasons: * The unit may be subject to vibration; install it on a stable, vibration-free surface. * The disc might be dirty; remove and clean it. * The disc could be very scratched; consider replacing it.
General| CD-RW playback | Yes |
|---|---|
| Device type | Portable CD player |
| Programmable tracks | 40 |
Key safety warnings and precautions for operating the device to prevent hazards.
Important guidelines and warnings for safe and optimal use, including handling, environment, and care.
Instructions for connecting the device using analog and digital audio outputs to amplifiers or receivers.
How to connect with other Onkyo components using RI for integrated control and system functions.
Step-by-step guide on powering up the CD changer and inserting discs into the bays.
How to initiate music playback and choose specific discs for listening.
Explains essential playback functions like Stop, Pause, Fast Forward, and Reverse.
Guide on navigating and selecting MP3 tracks using folder hierarchy or flat list modes.
How to directly select tracks or MP3 folders using numerical input for quick access.
How to view track times, names, artist information, and other details on the display.
Using the Next Selection function to queue up the subsequent track, folder, or disc.
How to set up repeating playback and enjoy music in a random sequence across discs.
Creating custom playlists and managing them, including checking, deleting, and cancelling.
Guide to identify and resolve common problems encountered while using the CD changer.
Technical details and operational parameters of the DX-C390 CD changer and its remote.
