To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R390(B) and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| 3D Support | Yes |
| Audio Return Channel (ARC) | Yes |
| Dolby TrueHD | Yes |
| DTS-HD Master Audio | Yes |
| Component Video Inputs | 2 |
| Composite Video Inputs | 2 |
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 1 |
| Analog Audio Inputs | 4 |
| Subwoofer Pre-Out | 1 |
| Headphone Output | 1 |
| Signal-to-Noise Ratio | 100 dB |
| Bluetooth | No |
| Wi-Fi | No |
| USB Port | No |
| HDMI Version | 1.4a |
| Tuner | FM |
| Input Sensitivity and Impedance | 200 mV/47 kΩ |
| Power Output per Channel | 100 W (6 Ohms, 1 kHz, 1 channel driven, IEC) |
| Total Harmonic Distortion | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
Highlights critical components for risk of fire and electric shock.
Lists different model variants and their AC voltage/frequency requirements.
Illustrates physical assembly of major components in view 1.
Illustrates physical assembly of major components in view 2.
Block and schematic diagrams for audio signal processing.
Diagrams for video signal paths and HDMI interface.
Diagrams for MPU and power supply sections.
Shows the layout of printed circuit board views, set 1.
Shows the layout of printed circuit board views, set 2.
Shows the layout of printed circuit board views, set 3.
Parts for exploded views, chassis, and cabinet.
List of semiconductors, capacitors, resistors, and passive components.
