38
Editing the contents of an MD (continued)
Dividing a track
The following operation is possible during the
playback is ongoing or paused.
1 Press the EDIT/NO button several
times until "Divide?" appears in
the display.
Fine adjust the point where you wish to
divide the track.
Within the playing part, you can move the
dividing point in the range of -128 to
+127. (Increasing or decreasing the
dividing point by 1 corresponds with
approximately 0.05second.)
4 Press the YES button to divide
the track.
When the dividing of the track is
completed, "Complete" appears in the
display.
TRACK
8910
11 12 13 14 15
DIGITAL IN
010 22040
R
6
L
15
910
11 12 13 14 15
DIGITAL IN
TOC
010 22040
R
6
L
15
1
TRACK
8910
11 12 13 14 15
DIGITAL IN
010 22040
R
6
L
15
1
To stop dividing a track
Press the EDIT/NO button until “Divide?”
disappears, or press the e button.
2 Press the YES button.
The part at which the track is to be
divided plays repeatedly, with “Rehearsal”
and “Position Ok?” alternately shown on
the display.
3 Turn the AMCS knob while
listening to the part being
played.
DISC LOADING MECHANISM0
REC
DISPLAY EDIT/NO
MINDISC RECODER
AMCS
（PUSH TO ENTER）
STANDBY/ON
STANDBY
CD
DUBBING
INPUT
ANALOG
ST D1 D2MO
YES
MD-
105
X
EDIT/NO
YES
qAMCSw
PUSH TO ENTER
(
)
AMCS
Dividing point
(0.5-sec silence)
Play (for 8 sec)
EDIT/NO
YES
YES
To Next Page
Loading...
Need help?
General
