To Next PageTo Next PageWhy is there no sound coming from certain Onkyo Home Cinema speakers?
If there's no sound from certain speakers, the speaker cables might not be properly connected. Ensure they are correctly connected. Also, the speaker configuration might not be set correctly; double-check the speaker configuration settings.
What to do if my Onkyo Home Cinema subwoofer produces no sound?
If your subwoofer isn't producing sound, check these potential causes: 1. Ensure the OUTPUT LEVEL control isn't set to the minimum; if it is, turn it up. 2. Verify that the RCA cable is properly connected to the subwoofer’s LINE INPUT. 3. If the input signal level was too low, the subwoofer might have entered Standby mode. Slightly increase the subwoofer pre out output level on your AV receiver. 4. The Subwoofer configuration may not be set correctly. Check the subwoofer setting in the speaker configuration on your AV receiver.
What to do if my Onkyo Home Cinema subwoofer produces hardly any sound?
If your subwoofer produces hardly any sound, it could be due to: * Source material containing little or no bass content. Try choosing source material with more bass. * The RCA cable not being properly connected to the subwoofer’s LINE INPUT. Ensure it is securely connected.
General| Speaker Type | Home Theater Speaker System |
|---|---|
| Speaker System Type | 5.1 channel |
| Satellite Speakers | 4 |
| Center Speaker | 1 |
| Subwoofer | 1 |
| Subwoofer Type | Bass reflex |
| Sensitivity | 82 dB |
| Magnetic Shielding | Yes |
| Power Handling | 100W |
| Impedance | 8 Ohm |
| Subwoofer Driver Size | 8 inch |
| Satellite Speaker Type | 2-way |
| Satellite Speaker Driver Size | 3 inch |
| Center Speaker Driver Size | 3 inch |
