Need help?Do you have a question about the Onkyo TA-R240 and is the answer not in the manual?
General| Type | Cassette Deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.76 cm/s |
| Heads | 1 x record/playback, 1 x erase |
| Wow and Flutter | 0.07% WRMS |
| Total Harmonic Distortion | 0.5% |
| Output | Line Out |
| Dimensions | 430 x 270 x 100 mm |
| Weight | 3.5 kg |
| Motor | DC motor |
| Tape Type | CrO2, Metal |
| Frequency Response (Metal Tape) | 30 Hz - 16 kHz |
| Frequency Response (Normal Tape) | 30 Hz - 14 kHz |
| Signal-to-Noise Ratio | 58 dB |
| Input | Line In |
| Frequency Response | 30Hz to 16kHz (Metal tape) |
| Signal to Noise Ratio (dolby B) | 66dB (dolby B) |
| Signal-to-Noise Ratio (Dolby B) | 66dB (dolby B) |
Instructions for replacing the power supply cord, ensuring correct insertion direction for safety.
Procedure for measuring insulation resistance using an insulating-resistance tester.
Guidance on replacing unit lamps, specifying the part number for the lamp used.
Safety and preparation guidelines before performing adjustments, including cleaning heads and demagnetizing.
List of essential test equipment and tools, such as oscilloscopes and audio oscillators, for adjustments.
To Next Page
