To Next PageTo Next Page
Need help?Do you have a question about the Online 600 Series and is the answer not in the manual?
Test the pinger's acoustic signal output using an acoustic receiver system.
Procedures for installing the pinger within a PIG body, ensuring proper transducer placement.
Steps and considerations for deploying the pinger, including pre-deployment checks and activation.
Detailed steps for safely replacing the pinger's C cells, including polarity and cell type considerations.
Explanation of the Dual Rate option for configuring different ping rates via an external connector.
Description of the GRID™ option for logging and transmitting gauge plate event times.
How the Delayed Start functionality conserves battery by entering a low-power mode before pinging.
Procedure for replacing O-ring seals on the pinger, ensuring proper greasing and sealing.
Guidelines for cleaning, maintenance, and proper storage of the pinger unit.
General| Brand | Online |
|---|---|
| Model | 600 Series |
| Category | Transmitter |
| Language | English |
