Portable Propane Gas Fire Pit
F-FPR7017-BS1
INSTALLATION GUIDE:
SECTION 1: ASSEMBLY
Step 1:
Remove the fire pit and other components from the package.
Step 2: Connect the gas regulater with the fire pit,please screw it tightly by tools to prevent
leaking.
Step 3: Place the rocks (not included) in burner area.Please note rocks are not to exceed 4 kg
NOTE TO USER:
• Before igniting the unit for the first time, follow steps in the below Ignition section.
Mix a solution of liquid soap and water in a spray bottle, and apply to the gas fittings you have
just connected.
• If parts of the fitting begin to produce bubbles, spray liquid, or if you smell liquid propane gas,
immediately close the valve on the tank, and leave the unit for at least an hour undisturbed to
allow excess gas to escape.
• After an hour, disconnect the hose and take the unit to a certified propane technician for
consultation.
SECTION 2: IGNITION
STEP 1
Ensure that unit valve dial is in the "OFF”
position by pushing and turning clockwise until
the dial stops.
Step 2
Securely attach regulator (large end of hose) to your
propane cylinder.
Screw the gas regulator clockwise
by tools (not included)
To Next Page
Loading...