EasyManua.ls Logo

Onlyfire 7026 - Operation Instructions; Lighting and Extinguishing Procedures

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Portable Tabletop Fire Pit
F-FPR7026-BK1
LIGHTING INSTRUCTION:
1. Turn all the control knobs clockwise to the 'OFF' position, and then turn the liquid propane
cylinder valve ON by slowly turning counterclockwise.
2. Push in and slowly turn the control knob anticlockwise until you hear a click and the burner
ignites. If not, repeat this process.
3. If the burner has not lit after retrying, wait 5 minutes and repeat step 2.
4. To turn the barbecue 'OFF', turn the cylinder valve or regulator switch to the 'OFF' position and
then turn the control knob on the appliance clockwise to the 'OFF' position.
EXTINGUISH INSTRUCTION:
1. Push and turn the ignition control knob clockwise to the OFF position.
2. Turn the propane gas tank valve on the gas tank to close the gas supply and disconnect the
propane gas tank.
WARNING:
Fire pit and propane gas cylinder minimum distance must be over 60 inches (as the picture
shows).