Need help?Do you have a question about the ONOFFSYSTEM NEOS-HSD200 and is the answer not in the manual?
Risk of electric shock and equipment failure; do not disassemble or repair.
Avoid solvents, gas, moisture, dust; do not spray smoke spray too close.
Noise blocking, temp/humidity measurement, RS485 communication, 4-channel output, self-reset, buzzer.
Diagram and table listing device parts: Display, LED, buttons, connectors, sensors.
Detection methods, measuring range, resolution, accuracy, operating conditions, power, connections, dimensions, weight.
Details on terminal functions for power and digital/relay outputs.
Pin assignments for RS485 communication interface.
RS485 communication wiring, relay output connection details and diagrams.
Diagrams for NPN type digital output and input signals.
Outline drawings and measurements; panel mounting position and bolt assembly details.
Diagrams for fixing bracket and panel perforation for installation.
Instructions for fixing brackets and aligning the product for installation.
Lists the heat and smoke detector, MOLEX housings, pin terminals, and M4 bolts included.
Details on MODE, UP, and DOWN switches for navigation and setting.
Overview of the primary display and the configuration screen layouts.
Explanation of various settings: temperature alerts, communication, display, buzzer, and saving.
How to switch between the main screen and alarm/error screens.
Adjusting temperature warning and deviation values, including operating conditions.
Configuring temperature alarm values, warning/alarm maintenance, and output settings.
Setting communication speed, protocol type (ONOFF/Modbus), and end code.
Configuring display auto-off and heartbeat function for power saving and status.
Setting buzzer operation and smoke detection sensitivity levels.
Displaying software version and options for saving or exiting settings.
Details on ONOFF protocol: method, baud rate, frame structure, commands, and data.
Commands for alarm reset, temperature warning, and alarm threshold configuration.
Setting deviation reference values and enabling/disabling temperature alerts.
Enabling keep temperature alerts and handling common error responses.
Description of the Modbus RTU packet format including address, function code, data, and CRC.
Details on Modbus Function 3 (Read Holding Registers) and Function 6 (Write Single Register).
Instructions for writing single and multiple holding registers using Modbus.
Examples of request and response packets for Modbus RTU communication.
Mapping of ONOFF status, buzzer, smoke level, and detection states to Modbus registers.
Mapping of error codes, temperature, and humidity values to Modbus registers.
Mapping of temperature enable/disable, warning maintenance, and alarm settings to Modbus registers.
Guide to setting ID, communication speed, protocol, and other parameters after initial power-up.
Steps to configure connection settings and connect the monitoring software to detectors.
Description of core functions: connection, settings, graph, log storage, and response data.
Details on selecting product family, name, protocol, port, and speed in the connection window.
Configuring detector ID, temperature alarm, warning, and deviation settings via the software.
Steps for monitoring data, scanning, and updating detector information through the software.
Statement regarding Class A equipment conformity for business use and potential home environment interference.
General| Brand | ONOFFSYSTEM |
|---|---|
| Model | NEOS-HSD200 |
| Category | Security Sensors |
| Language | English |
To Next Page