9
5.Menu Setting Instruction
Press the M key in the recording mode to enter the system setup
menu interface.
1.Lens switching
Set “Before”: the video front screen is enlarged in front of the
road and the rear channel is zoomed out.
Set “Back”: The video front screen is enlarged after the road,
and the front road is zoomed out.
Note:
*The system defaults to "before".
*The “Lens Switching” column will only be available
in the settings when the recorder has access to the rear camera.
2.Camera properties
1.Resolution: The video can be recorded at different resolutions
separately: 2160P30/1440P30/1296P30/1080P30/720P30. The
default resolution is 2160P30.
2.Video encode: The recorded video encoding can be set to the
encoding format of H265 and H264.
3.Distortion correction: The default is “Off” state. When set to
“On”,the distortion of the picture can be reduced.
To Next Page
Loading...