COMPONENTS
1. Rotating Rubberized Hang Loop
2. Handle
3. Heavy Duty Aluminum Pole
4. Rechargeable 7.2V Battery
5. Battery Compartment
6. On/Off Switch
7. Magnetic “Latch A”
8. Pole Base
9. Air Filter
10. Tinted Outer Body Frame
11. Base
12. Touchless Dirt Tray
13. Outer Body Frame Lock Clips
14. Removable Rotating Brushes
(x 5, Not All Shown)
15. Magnetic “Latch B”
16. Touchless Dirt Tray
Lock/Release Tabs
17. One-Piece Battery
Charger
IMPORTANT MAINTENANCE & CARE:
Step 6) Lift the “Air Filter” up & out by its “Removal Notch” (SEE
FIG. 9). Rinse the “Air Filter” off, let dry and replace back into
sweeper.
Periodically wipe down your Swivel Sweeper
with a dry or damp lint-free cloth. Do not use
water, liquid cleansers or abrasive materials
to clean Swivel Sweeper.
MAGNETIC LATCH SYSTEM
FOR SPACE-SAVING STORAGE:
Swivel Sweeper’s Magnetic Latch System lets you store
your Sweeper in a compact manner between uses.
Storing Swivel Sweeper
Between Uses:
IMPORTANT: When you are
nished cleaning with Swivel
Sweeper, empty out the
“Touchless Dirt Tray,” close it,
then ip the sweeper head up to
the side of the “Pole Base” to
engage the two “Magnetic
Latches,” for space-saving
storage between uses
(SEE FIG. 10).
To release the Sweeper head
from the “Pole Base,” gently tap
it down.
1
2
3
4
5
6
7
8
9
11
1413
10
12
15
16
FIG. 9
Removal
Notch
FIG. 10
17
3 8
To Next Page
Loading...
Need help?
General
