Before browse website you need to access network through Wi-Fi
Configuration.
Wi-Fi Configuration
At the Wi-Fi configuration interface, follow the steps below to enable the
function.
• Make sure the Wi-Fi switch is turned
on (slide upward)
• The Hardware Address is displayed
after Wi-Fi switch is turned on.
• The device will search for the
available Wi-Fi automatically. The
available Wi-Fi connection will be
displayed in the list.
• Select to add a new SSID.
• Select to refresh Wi-Fi access
points.
• Select a wireless network with the
Navigation Button and press it to
connect to Wi-Fi.
• Enter the password if the network is
encrypted. Connection will be
established automatically.
To Next Page
Loading...
