Why gas burner for Ooni will not maintain it’s flame?
If the gas burner for your Ooni won't maintain its flame, open the chimney vent to allow better airflow through the oven. Also, make sure your Ooni is on a flat surface, as a slant can affect oxygen flow.
What to do if my Ooni FSD is not functioning correctly?
If your Ooni's FSD isn't working right, it could be due to soot buildup on the FSD probe. Turn off the gas supply and burner, let the burner cool, then gently clean the probe and burner holes with a damp cloth. Let the burner dry completely before relighting.
General| Weight | 26.4 lbs |
|---|---|
| Materials | Stainless steel |
| Fuel | Wood, charcoal, or gas (with optional gas burner attachment) |
| Maximum Temperature | 950°F (500°C) |
| Cooking Surface Diameter | 13" |
| Portability | Portable |
| Stone Baking Board | Cordierite stone |
Check hose for damage and connections for leaks before use.
Screw regulator onto cylinder and leak test connections.
Ensure only provided regulator and hose assembly are used.
Visual examples of suitable outdoor spaces for appliance use.
Guidelines for wall openings and ventilation in enclosed outdoor spaces.
Connect the gas hose to the appliance using appropriate fittings.
Remove oven door and fuel tray, ensure chimney vent is open.
Detach the draft defender plate to allow burner access.
Secure the Ooni Gas Burner to the oven body.
Safely connect the gas hose to the propane cylinder.
Preparation steps before performing leak testing.
Step-by-step instructions for conducting the leak test.
Ignite the gas burner using the built-in igniter.
Confirm that the gas burner has successfully ignited.
Alternative method for igniting the burner with a match.
Causes and solutions when the oven does not reach sufficient temperature.
Troubleshooting steps if the burner fails to ignite.
Explains flame color variations and their impact.
Addresses issues with the Flame Safety Device (FSD) probe.
Solutions for when the gas burner flame is not sustained.
Diagnosing and resolving issues causing unusual burner sounds.
Identifies the model and displays essential product certification information.
Details about the injector size and regulator compatibility.
A concise summary of the burner lighting procedure.
Guidelines for safe storage and cylinder disconnection.
A consolidated list of ignition steps.
To Next Page
