3
Loosen the adjustment
knob on the back of the
bracket until the bracket
is wide enough to fit on
the bottom of the
speaker.
Adjustment
Knob
2
OontZ Speaker Bracket
Attach the OontZ SUP Mount
to the OontZ Speaker Bracket.
1) Place the bottom of the
OontZ Speaker Bracket into
the slots of the OontZ SUP Mount.
2) Insert the Thumb Screw
into the OontZ SUP Mount.
3) Tighten the Thumb Screw
to secure the bracket to the
mount. When tightened the
speaker will stay in position.
OontZ SUP
Mount
OontZ Speaker
Bracket
Thumb
Screw
To Next Page
Loading...